Door Handle - GE 200D9366P020 Owner's Manual And Installation Instructions

INSTALLING THE REFRIGERATOR
REMOVE THE FRESH FOOD
6

DOOR HANDLE

(For placement in the installation location or
reversal of the handles – on some models)
Stainless steel (on some models):
REMOVING THE DOOR
A
HANDLE: Loosen the
set screws with the
3/32 Allen wrench
and remove the
handle. NOTE: For
Double Door models
follow the same
procedure on the
opposite door.
Plastic handle (on some models):
REMOVING THE DOOR HANDLE: Depress the tab on
A
the underside of the handle and slide the handle up
and off of the mounting fasteners.
REVERSING THE DOOR HANDLE (on some models):
• Remove
the handle
mounting
fasteners with a
1/4 Allen
wrench and
transfer the
handle mounting
fasteners to the
right side.
• Remove the logo
badge.
• Remove and
transfer the
plug button to
the left side of
the fresh food
door. NOTE: Use a flat plastic edge to prevent
damaging the door. Remove any adhesive on the
door with a mild detergent. Remove the paper
covering on the adhesive backing on the logo badge
prior to carefully attaching the badge to the door.
Installation Instructions
A
B
B
A
(cont.)
REMOVE THE FREEZER DOOR HANDLE
7
Stainless steel and plastic handles:
Loosen the set screws located on the underside of
A
the handle with the 1/8 Allen wrench and remove
the handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed use a 1/4 Allen wrench.
22
A