Installing The Door Handle - GE 16 Series Owner's Manual & Installation Instructions

Installation Instructions

INSTALLING THE DOOR HANDLE

INSTALL FASTENER
1
fastener into the hole
fresh food doors. The
fasteners correspond
with the handle side
(the side opposite the
hinge).
STAINLESS STEEL HANDLE
2
allen wrench to tighten the set screw at the top
of the handle. Tighten until handle is locked
firmly into position.
2. Attach handle to fresh food door with screws
allen wrench to tighten the set screw at the
bottom of the handle. Tighten until handle is
locked firmly into position.
NOTE: Be sure to
handle installation,
if applicable
14
PLASTIC HANDLE
2A
handle up onto fastener and with screws at
the bottom of the handle.
2. Attach handle to fresh food door by sliding
handle down onto fastener and with screws at
top of handle.
NOTE: Be sure to remove
if applicable)
BADGE AND PLUG BUTTON
3
INSTALLATION
1. Place a plug button on the opposite side of the
fresh food door across from the handle.
2. Remove the backing on the GE Appliances
badge and carefully place it in the hole
sure the badge is oriented the correct way
before applying it to the door.
Badge
Plug
button
49-60801-1