What To Do If - Zanussi ZDE67560W User Manual

Exhaust dryer
Hide thumbs Also See for ZDE67560W:
Table of Contents

Advertisement

Cleaning the drum
Caution! Do not use abrasives or steel
wool to clean the drum.
Lime in the water or cleaning agents may
form a barely visible lining on the inside of
the drum. The degree to which the laundry has
been dried is then no longer detected reliably.
The laundry is damper than expected when re-
moved from the dryer.

What to do if ...

Problem
Dryer does not work.
Drying results unsatisfactory.
Loading door does not close.
Drying cycle ends shortly after pro-
gramme starts.
Drying cycle lasts an unusually
long time. Note: After around 5
hours the drying cycle ends auto-
matically.
1) Only dryers with conductance programming
2) Only dryers with removable filter
10
Use a standard domestic cleaner (e.g. vinegar-
based cleaner) to wipe down the inside of the
drum and drum ribs.
Clean operating screen and housing
machine.
Use a damp cloth to wipe down the operating
screen and housing.
Possible cause
Mains plug is not plugged in or
fuse is not working correctly.
Loading door is open.
Have you pressed the START
PAUSE button?
Wrong programme selected.
Fluff filter clogged.
Overloading of laundry.
Ventilation slots covered up.
Residue on inside surface of drum
or drum ribs.
Conductance of water at installa-
tion site differs from standard set-
1)
ting of machine.
2)
Filter not in place
.
Not enough washing loaded or
washing loaded is too dry for se-
lected programme.
Filter clogged.
Load volume too big.
Laundry insufficiently spun.
Caution! Do not use furniture cleaners or
aggressive cleaning agents to clean the
Plug in at mains socket. Check
fuse in fuse box (domestic installa-
tion).
Close loading door.
Press the START PAUSE button
again.
Select a different programme the
next time you dry (see "Programme
chart" chapter).
Clean fluff filter.
Observe recommended loading
volumes.
Uncover ventilation slots.
Clean inside surface of drum and
drum ribs.
Re-programme standard setting
for degree of drying (see 'Machine
settings' chapter)
Install filter into place
Select time programme or higher
drying level (e.g. EXTRA DRY in-
stead of CUPBOARD DRY ).
Clean filter.
Reduce load volume.
Laundry must be adequately spun.
Remedy
1)
.
2)
.
www.zanussi.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents