Making Calls Using The Headset - Sennheiser VMX 200-II Instruction Manual

Using the VMX 200-II

Making calls using the headset

Making a call
Dial the desired number on your mobile phone.
You hear a beep in the headset.
If your mobile phone does not automatically transfer the call to the
headset, simply press the multi-function button once to transfer the
call from the mobile phone to the headset. Alternatively, press a button
on your mobile phone (see the instruction manual of your mobile
phone).
Accepting/rejecting/ending a call
When your VMX 200-II is connected to a mobile phone and you receive
a call, you hear a ring tone in the headset and the LED flashes blue. If the
headset battery is low, the LED flashes red instead of blue.
If you listen to music, the music is paused until you end the call.
When you receive a call and your headset is switched off, simply switch
your headset on to accept the call.
Press the multi-function button:
Duration Function
Accepts a call
Rejects a call
2s
Ends a call
Transfering the call to/from the headset
Once a connection is established, you can transfer the call to/from the
headset.
Press the multi-function button:
Duration Function
Transfers a call from the headset to
2s
the mobile phone
Transfers a call from the mobile
phone to the headset
Voice prompt/beeps
"Rejecting call"
"Call ended"
Beep(s)
VMX 200-II | 17