Managing Multiple Calls - Sennheiser VMX 200-II Instruction Manual

Using the VMX 200-II

Managing multiple calls

You can use the VMX 200-II simultaneously with two connected Bluetooth
devices (Multi Connection).
In order for this to function, at least two Bluetooth devices must already
be paired with the headset. To do so, follow the instructions in the chapter
"Connecting the headset to a Bluetooth device" (see page 11).
Switch the headset on. The headset automatically tries to establish
a Bluetooth connection to the two last connected Bluetooth devices.
Managing two calls
You can manage two calls:
• from either two different Bluetooth devices or
• from one Bluetooth device.
If you want to manage two calls from one Bluetooth device, disconnect
the second Bluetooth device.
If you receive a call during an active call:
Press the multi-function button:
2nd
Duration Active call incoming call Function
2 x
2s
If you put an active call on hold (toggling):
Press the multi-function button again:
2nd call
Duration Active call put on hold Function
2s
Accepts the incoming call and
ends the active call
Voice prompt: "Call ended"
Accepts the incoming call and
puts an active call on hold
(toggling – phone dependent)
Rejects the incoming call and
continues the active call
Ends the active call and makes the
call on hold active
(phone dependent)
Establishes a conference call
(for 2 calls on one mobile phone
only)
VMX 200-II | 19