Sennheiser VMX 200-II Instruction Manual page 13

Putting the VMX 200-II into operation
12 | VMX 200-II
Pairing the VMX 200-II with a Bluetooth device
The following chapter describes, by way of example of a mobile phone,
how to pair the VMX 200-II with a Bluetooth device. In case of deviation,
proceed as described in the instruction manual of your mobile phone.
1 Switch the headset off (see page 15). Then keep the multi-function
button pressed until the LED alternately flashes blue and red. The
headset is in pairing mode.
2 Enable the Bluetooth visibility on your mobile phone.
3 On the mobile phone, start a search for Bluetooth devices. All available
devices in the proximity of the mobile phone are displayed.
4 From the found Bluetooth devices, select "Sennheiser VMX 200-II" to
establish a Bluetooth connection to the headset. If necessary, enter
thedefault PIN code "0000".
5 Once the headset is paired with the mobile phone, the LED turns off.
1
5 s
3
Menu
Add device
5
If pairing is not successful within 5 minutes, the headset automatically
returns to connectable mode. Repeat the pairing procedure.
2
Menu
Bluetooth on
Bluetooth off
20 cm
4
Sennheiser VMX 200-II
Mobile phone Jane
Sennheiser VMX 200-II
Keyword:
0000