Weslo Gym 750 User Manual page 8

ARM ASSEMBLY
7. Apply grease to an M10 x 70mm Bolt (57). Attach
the Leg Lever (9) to the Seat Frame (8) with the
Bolt and an M10 Nylon Locknut (68). Do not
overtighten the Locknut; the Leg Lever must
be able to pivot easily.
8. Apply grease to an M10 x 125mm Bolt (64).
Orient the Press Frame (5) with the bracket on
the side shown. Attach the Press Frame to the
Top Frame (4) with the Bolt, two M10 Washers
(70), and an M10 Nylon Locknut (68). Do not
overtighten the Locknut; the Press Frame
must be able to pivot easily.
9. Apply grease to the indicated post on the Left
Arm (7). Slide a 25mm x 68mm Round Bushing
(28) onto the post on the Arm; make sure that
the lip on the Bushing is oriented as shown.
Attach an Arm Pad (20) to the Left Arm (7) with
two M6 x 58mm Screws (65) and two M6
Washers (73).
Repeat this step with the Right Arm (6).
7
Grease
57
9
8
64
Grease
70
5
Bracket
9
6
8
8
68
4
68
70
28
Lip
Post
7
73
65
73
20