Weslo Gym 750 User Manual page 7

4. Slide the eight Weights (15) onto the Weight
Guides (10), with the slot for the Weight Pin (not
shown) on the bottom and on the side away from
the Upright (3).
Insert the Weight Tube (12) into the Weights (15).
Lubricate the indicated holes in the Top Weight
(14) with grease. Slide the Top Weight onto the
Weight Guides (10).
5. Attach the Top Frame (4) to the Upright (3) with
two M8 x 68mm Bolts (63) and two M8 Nylon
Locknuts (69). Do not tighten the Locknuts .
Attach the Top Frame (4) between the Weight
Guides (10) with an M10 x 155mm Bolt (62), two
M10 Washers (70), and an M10 Nylon Locknut
(68).
Tighten the Nylon Locknuts (68, 69) used in
steps 2 and 5.
6. Attach the Seat Frame (8) to the Upright (3) with
two M10 x 70mm Bolts (57) and two M10 Nylon
Locknuts (68).
Attach the Bumper (75) to the Seat Frame (8)
with an M4 x 19mm Self-tapping Screw (76) and
an M4 Washer (77).
4
5
62
4
6
8
76
75
77
7
10
Lubricate
14
12
3
15
70
10
70
63
68
3
69
3
57
68