Weider Pro 330 Bench User Manual page 11

14. Attach the Right Fly Arm (52) to the Right
Upright Base (4) with an M10 x 130mm Bolt
(65), two 10mm Bushings (38), and an M10
Nylon Locknut (58). Do not overtighten the
Nylon Locknut; the Right Fly Arm must pivot
easily.
Attach the Right Fly Handle (33) to the Right
Fly Arm (52) with an M10 x 58mm Bolt (60) and
an M10 Nylon Locknut (58). Do not overtight-
en the Nylon Locknut; the Right Fly Handle
must pivot easily.
Repeat this step for the other side of the
weight bench.
15. Insert a Weight Rest (39) into one of the holes
in the Left Upright (31) and engage the locking
bar around the Left Upright. Next, insert a
Barbell Hook (69) into the Weight Rest and
attach the Barbell Hook with an M8 Washer
(50) and an M8 Nylon Locknut (49).
Repeat this step with the other Weight Rest
(39) and the Right Upright (28).
16. Attach the Curl Pad (20) to the Curl Post (13)
with two M6 x 16mm Screws (41).
17. Make sure that all parts are properly tight-
ened before you use the weight bench. The
use of all remaining parts will be explained
in ADJUSTMENTS, starting on the next
page.
14
33
60
65
15
39
28
69
16
20
11
58
52
38 58
38
4
31
39
50
Locking
49
Bar
13
41