Specifications - dbx iEQ-15 User Manual

iEQ
Inputs
Connectors:
Type:
Impedance:
Max Input Level:
CMRR:
Outputs
Connectors:
Type:
Impedance:
Max Output Level:
System Performance
Frequency Response:
Dynamic Range:
THD+Noise:
Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
Noise Reduction:
Digital Resolution:
Sample Frequency:
Latency:
Function Switches
AFS™:
TYPE V™ NR:
EQ Bypass:
Low Cut:
Range:
Indicators
Output Level:
Gain Reduction:
Type V™ NR:
EQ Bypass:
Clip:
Low Cut:
+/-15dB:
Power Supply
Operating Voltage:
Power Consumption:
Mains Connection:
Physical
Dimensions:
iEQ15:
iEQ31:
Dimensions (h x l x p):
Weight:
iEQ15:
iEQ31:
Shipping Weight:
iEQ 15:
iEQ 31:
Note: Specifications subject to change.
® ®
1/4" TRS, female XLR (pin 2 hot), and Euroblock
Electronically balanced/unbalanced, RF filtered
Balanced 40kΩ, unbalanced 20kΩ
+22dBu balanced or unbalanced
>40dB, typically >55dB at 1kHz
1/4" TRS, male XLR (pin 2 hot), and Euroblock
Balanced/unbalanced, RF filtered
Balanced 120Ω, unbalanced 60Ω
+20dBu balanced/unbalanced into 2kΩ or greater
20Hz to 20kHz, +0.5/-0.25dB
>113dB, "A" weighted
0.003% typical at +4dBu, 1kHz
Up to 10dB of dynamic broadband noise reduction
24 bits
48kHz
2msec
Activates dbx AFS™ Advanced Feedback Suppression
Activates dbx Type V™ Noise Reduction
Bypasses the graphic equalizer section in the signal path
Activates the 40Hz 18dB/octave Bessel high-pass filter Range
Selects either +/- 6dB or +/- 15dB slider boost/cut range
4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
4-LED bar graph (all Red) at 0, 3, 6, and 10dB
1 LED: yellow, green or red
1 LED: red
1 LED: red
1 LED: red
1 LED: red
120VAC 60Hz, 220-240VAC 50/60Hz
17 Watts
IEC receptacle
3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
5.25" H X 19" W X 7.9" D (13.4cm x 48.3cm x 20.1cm)
7.5 lbs.
9.25 lbs.
8.5 lbs.
10.25 lbs.

Specifications

iEQ User Manual
Operation
Specifications
8