Removing The Front Panel; Attaching The Front Panel; Resetting The Microprocessor - Pioneer FH-P4000R Operation Manual

Before You Start

Removing the front panel

1 Press to release the front panel.
DETACH
Press and the left side of the panel is
DETACH
released from the head unit.
button
DETACH
2 Grab the front panel and remove.
Grab the left side of the front panel and pull
away to the right. The front panel will be
detached from the head unit.
3 Put the front panel into the protective case
provided for safe keeping.

Attaching the front panel

1 Place the front panel flat against the head
unit.
2 Press the front panel into the face of the
head unit until it is firmly seated.

Resetting the microprocessor

The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time after
installation
• If the unit fails to operate properly
• When strange or incorrect messages appear
on the display
1 Remove the front panel.
See Removing the front panel on this page.
2 Press on the head unit with a pen
RESET
tip or other pointed instrument.
button
RESET
Section
01
5
En