Using The Position Selector; Using Subwoofer Output - Pioneer FH-P4000R Operation Manual

Digital Signal Processor

Using the position selector

One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi-
tion selector adjusts the volume level of sound
from each speaker to match seat positions and
the number of people in the car and lets you
recall settings at the touch of a button. The
result is a natural sound regardless of where
you are seated. Here is a list of the positions:
Button Display Indicator
5
FRONT
∞
ALL
2
FRONT-L
3
FRONT-R
1 Press to select the position selector.
DSP
Press until appears in the display.
DSP POSI
• If the position selector has been previously set
to a listening position then the title of that previ-
ously selected listening position will be
displayed, such as
FRONT
.
FRONT-R
Position
Front seat
All seats
Front seat left
Front seat right
, , or
ALL FRONT-L
2 Press 2 / 3 /5/∞ to select a listening posi-
tion.
Press one of these, 2 / 3 /5/∞, to select a listen-
ing position as listed in the table.
• To cancel the selected listening position,
press the same button again.
• When the rear output setting is subwoofer,
you cannot select . Refer to Switching the
ALL
rear output setting on page 51.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be switched on or off. When a sub-
woofer is connected to the rear output, first,
switch the rear output setting to subwoofer,
then turn the subwoofer output on. For more
details, see Switching the rear output setting on
page 51.
1 Press to select
DSP
When the rear output setting is subwoofer, you
can select . Press
SUB.W
appears in the display.
2 Press 5 to turn subwoofer output on.
appears in the display. Subwoofer
SUB.W :ON
output is now on.
• You can turn off subwoofer output by pressing
∞.
.
SUB.W
until
DSP SUB.W
En
Section
10
47