Switching The Rds Display; Selecting Alternative Frequencies - Pioneer FH-P4000R Operation Manual

RDS
Press to display the function
FUNCTION
names.
Press repeatedly to switch between
FUNCTION
the following functions:
(best stations memory)—
BSM
(local seek tuning)—
LOCAL
gram type selection)—
ment standby)—
NEWS
interruption)— (alternative frequencies
AF
search)
• To return to the frequency display, press
BAND/ESC.
• If MW/LW band is selected, you can only
select or .
BSM LOCAL
Notes
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the frequency display.
• RDS service may not be provided by all sta-
tions.
• RDS functions like AF and TA are only active
when your radio is tuned to a RDS station.
(regional)—
REG
(pro-
PTY SELECT
(traffic announce-
TA
(news program

Switching the RDS display

When you tune in a RDS station its program
service name is displayed. If you want to know
the frequency you can.
Press .
DISPLAY
Press repeatedly to switch between
DISPLAY
the following settings:
Program service name—PTY information—
Frequency
PTY (program type ID code) information is listed
on page 20.
• PTY information and the frequency of the
current station appears on the display for eight
seconds.
• If a PTY code of zero is received from a station,
is displayed. This indicates that the sta-
NONE
tion has not defined its program contents.
• If the signal is too weak for this unit to pick up
the PTY code, is displayed.
NO PTY

Selecting alternative frequencies

If you are listening to a broadcast and the recep-
tion becomes weak or there are other problems,
the unit will automatically search for a different
station in the same network which is broadcast-
ing a stronger signal.
• AF is on as a default.
1 Press to select
FUNCTION
Press until
FUNCTION
play.
2 Press 5 to turn
AF
Press 5 and
is displayed.
AF :ON
3 Press ∞ to turn
AF
Press ∞ and
is displayed.
AF :OFF
AF.
appears in the dis-
AF
on.
off.
En
Section
05
15