Description
The anti-vibration system reduces the vibra-
tions which pass from the engine and cutting
equipment to the handles. The anti-vibration
system consists either of rubber elements or
coil springs.
The system's movement limitation consists
of side absorbers and/or stop screws.
Dismantling
The tank unit must be removed from the engine sub-assembly to access the anti-vibration system.
See the previous pages.
Saw 394
Release the catch on the plastic key.
Slide off the spring and its holder.
106
– English
ANTI-VIBRATION SYSTEM
Saws 40, 45 and 3120
Other saws
Remove the rubber element using re-
spective tools as shown in the figure
below.
Remove the spring element using an allen
key as shown below.