Cleaning And Inspection; Assembly - Husqvarna 36 Workshop Manual

Cleaning and Inspection

Clean and inspect all parts.
The thickness of the brake band must not be
under 0.8 mm at any point.

Assembly

Fit the band's fixed end into position on the
clutch cover.
All saws except 3120
Grease the knee link and knock in the tubular
pin that holds the knee link.
Continues on next page.
44
– English
SAFETY EQUIPMENT
3120
Min. 0.8 mm
Fit the screw that holds the band's fixed end.
3120 continues on next page.