Memory Navi Mode; Navigation In The Memory Navi Mode - Pioneer AVIC-X3 Operation Manual

MAN-AVIC-X3-EN.book Page 124 Wednesday, June 6, 2007 10:15 AM
5
Press the MENU button.
The adjusted position data is saved.
Do not turn off the engine while saving the
adjusted position data.
Press the MENU button to complete the 4-
point adjustment.
To cancel the adjustment, press and hold
the MENU button.
6
Press the MENU button.
The 16-point touch panel adjustment screen
appears.
7
Gently touch the centre of the + mark dis-
played on the screen with the touch panel
adjustment pen.
After you touch all marks, the adjusted posi-
tion data is saved.
Do not turn off the engine while saving the
adjusted position data.
Press the MENU button to return to the
previous adjustment position.
8
Press and hold the MENU button.
The adjustment is complete.
If touch panel adjustment cannot be per-
formed properly, consult your local Pio-
neer dealer.

Memory Navi Mode

While the DVD Map Disc is inserted, you can
store the data on the DVD Map Disc into the
memory of the navigation system. If the DVD Map
Disc is removed from the navigation system after
the data is stored, navigation is performed using
the data in the memory (memory navi mode). In
the memory navi mode, you can play a music CD
or DVD-Video on the navigation system while nav-
igation is taking place.
The operation is automatically switched to the
memory navi mode when the DVD Map Disc is
removed from the navigation system.
Navigation in the memory navi
mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared with navigation using the DVD Map Disc
124
(DVD navi mode). These function buttons, which
cannot be used in the memory navi mode, are
indicated in light grey. (If you want to use these
functions, please insert the DVD Map Disc
again.) In addition, you may need to insert the
DVD Map Disc and store new data in the memory
during navigation operation, such as when the
destination is far away.
The memory navi mode uses the following map
data to perform navigation.
The following are collectively known as Memory
Data:
• Manually downloaded memory area data in
"Map in Memory" of the Settings menu (Man-
ual downloaded Memory Area)
• Automatically downloaded memory data of the
surrounding areas during the route search
(Auto downloaded Memory Area)
Setting of the memory area
What is the manual downloaded mem-
ory area?
Memory area is the area of the map data that the
user voluntarily read into the memory for the
memory navi mode. Normal guidance is available
if the memory area is stored and you drive within
the stored area.
What is the auto downloaded memory
area?
This is the zone around the route in the map area
that is automatically stored in the memory when
the route is set. When the route distance is 120
km (74.5 mi) or shorter, a zone with a width of
approximately 17.5 km (10.9 mi) around the route
is stored. When the route distance is longer than
120 km, a zone with a width of approximately 10.6
km (6.6 mi) around the route is recorded.
This data is transmitted to the memory as you set
the route. When a new route is entered, the mem-
orised data is deleted.
The data read into the memory will not be deleted
even when the vehicle's engine is turned off.
The memorised area may be deleted in the follow-
ing circumstances:
• Yellow lead of the navigation system or the
vehicle battery is disconnected.
• The RESET button is pressed.
• Navigation software is updated.
• System language is changed.
Page 66