Using Pi Seek; Using Auto Pi Seek For Preset Stations; Limiting Stations To Regional Programming - Pioneer AVIC-HD3 Operation Manual

MAN-HD3-SOFTW-EN.book Page 104 Wednesday, January 10, 2007 9:33 AM

Using PI Seek

If the navigation system fails to find a suitable
alternative frequency, or if you are listening to a
broadcast and the reception becomes weak, the
navigation system will automatically search for a
different station with the same programming.
During the search, "PI Seek" is displayed and the
output for audio source is muted. The muting is
discontinued after completion of the PI Seek,
whether or not a different station is found.
Using Auto PI Seek for preset
stations
When preset stations cannot be recalled, as
when travelling long distances, the navigation
system can be set to perform PI Seek during pre-
set recall.
The default setting for Auto PI Seek is off.
"Switching Auto PI seek"
Limiting stations to regional
programming
When AF is used to automatically retune frequen-
cies, the regional function limits the selection to
stations broadcasting regional programmes.
1
Touch (or
Touching the key switches the status between
on and off.
Regional programming and regional net-
works are organised differently depending
on the country (i.e., they may change
according to the time, country or broad-
cast area).
The preset number may disappear on the
display if the tuner tunes in a regional sta-
tion which differs from the originally set
station.
The regional function can be turned on or
off independently for each FM band.
104
Page 141
).