NordicTrack Gx 5.5 Sport Bike Manual page 10

9. Remove the 1/4" x 1" Screw (63), the Carriage
Cover (40), and the Carriage Plate (42) from the
Handlebar Carriage (19). Set these parts aside
until step 10.
10. Orient the Handlebar (5) assembly as shown.
Have a second person hold the Handlebar
assembly near the Handlebar Post (4).
Connect the Extension Wire (50) in the
Handlebar (5) assembly to the Reed Switch
Wire (61). Insert some of the excess wire into
the Handlebar Post (4), and insert the connec-
tors into the Handlebar Carriage.
Tip: Avoid pinching the wires. Locate the
Adjustment Handle (23) on the Handlebar Post
(4). Loosen the Adjustment Handle and slide
the Handlebar Carriage (19) onto the Handlebar
Post.
Note: The Adjustment Handle (23) functions like
a ratchet. See step 6 for an explanation.
Slide the Handlebar Carriage (19) to the desired
position and then tighten the Adjustment
Handle (23) into the underside of the Handlebar
Carriage. Make sure that the Adjustment
Handle is firmly tightened.
9
42
40
63
10
Avoid pinching
the wires
61
4
10
19
5
50
19
23