Table of Contents
Advertisement
www.nordictrack.com
Model No. NTL22011.2
USER’'S MANUAL
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
ACTIVATE YOUR
WARRANTY
To register your product and
activate your warranty today, go
to www.nordictrackservice.com/
registration.
CUSTOMER CARE
For service at any time, go to
www.nordictrackservice.com.
Or call 1-800-TO-BE-FIT
(1-800-862-3348)
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
Please do not contact the store.
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for NordicTrack Elite 9700 Pro Treadmill
Summary of Contents for NordicTrack Elite 9700 Pro Treadmill
- Page 1 Model No. NTL22011.2 USER’’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.nordictrackservice.com/ registration. CUSTOMER CARE For service at any time, go to www.nordictrackservice.com.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decal is not shown at actual size. NORDICTRACK is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
16. To purchase a surge suppressor, see 4. The treadmill is intended for home use only. your local NORDICTRACK dealer, call the Do not use the treadmill in any commercial, telephone number on the front cover of this rental, or institutional setting. - Page 4 20. The heart rate monitor is not a medical 24. Inspect and properly tighten all parts of the device. Various factors, including the user’’s treadmill regularly. movement, may affect the accuracy of heart DANGER: rate readings. The heart rate monitor is Always unplug the power intended only as an exercise aid in determin- cord immediately after use, before clean-...
- Page 6 STANDARD SERVICE PLANS...
-
Page 7: Before You Begin
ELITE 9700 PRO treadmill. The manual. To help us assist you, please note the product ELITE 9700 PRO treadmill offers an impressive selec- model number and serial number before contacting us. tion of features designed to make your workouts at The model number and the location of the serial num- home more enjoyable and effective. -
Page 8: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly. -
Page 9: Assembly
ASSEMBLY •• Assembly requires two persons. •• To identify small parts, see page 8. •• Place all parts in a cleared area and remove the •• Assembly requires the following tools: packing materials. Do not dispose of the packing the included hex key materials until you ... - Page 10 2. Make sure that the power cord is unplugged. Identify the Right Upright (90). Have a second person hold the Right Upright near the Frame (56). Wire See the inset drawing. Tie the wire tie in the Right Upright (90) securely around the end of the Upright Wire (84).
- Page 11 4. Remove the ties from the Cage Nuts (7) on both sides of the handrail assembly (only one side is Handrail shown). Assembly With the help of a second person, hold the hand- rail assembly near the Right Upright (90). Connect the Upright Wire (84) to the Handrail Wire (86).
- Page 12 6. Attach the handrail assembly with six 5/16" x 1" Bolts (53) and six 5/16" Star Washers (67). Start Handrail all six Bolts, and then tighten them. Assembly 53 67 7. With the help of a second person, hold the con- Console sole assembly near the handrail assembly.
- Page 13 8. Firmly tighten the 3/8" x 2 3/4" Bolt (11) and the 3/8" x 4 1/4" Screw (43) on each side of the treadmill (only one side is shown). 9. Identify the Right Outside Frame Cover (103) and the Right Inside Frame Cover (102). Slide the Right Inside Frame Cover (102) onto the bracket between the Motor Hood (71) and the Right Upright (90).
- Page 14 10. Identify the Right Outside Upright Cover (85) and the Right Inside Upright Cover (63). Attach the Right Inside Upright Cover to the Right Upright (90) with two #8 x 3/4" Screws (1). Be careful not to overtighten the Screws. Press the Right Outside Upright Cover (85) against the Right Inside Upright Cover (63) until the two Upright Covers snap together.
-
Page 15: The Chest Heart Rate Monitor
THE CHEST HEART RATE MONITOR HOW TO PUT ON THE HEART RATE MONITOR •• Do not expose the heart rate monitor to direct sun- light for extended periods of time; do not expose it The heart rate to temperatures above 122° F (50° C) or below 14° monitor consists of F (-10°... -
Page 16: Operation And Adjustment
OPERATION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’’s... - Page 17 CONSOLE DIAGRAM MAKE YOUR FITNESS GOALS A REALITY WITH FEATURES OF THE CONSOLE IFIT.COM The advanced treadmill console offers an array of fea- With your new iFit-compatible fitness equipment, you tures designed to make your workouts more effective can use an array of features on iFit.com to make your and enjoyable.
- Page 18 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before turning on the power.
- Page 19 HOW TO SET UP THE CONSOLE The console is now ready for you to begin working out. The following pages explain the various workouts and Before using the treadmill for the first time, set up the other features that the console offers. console.
-
Page 20: To Use The Manual Mode
HOW TO USE THE MANUAL MODE of the numbered 1 Step Incline/Decline buttons. Each time you press one of the buttons, the incline 1. Insert the key into the console. will gradually change until it reaches the selected incline setting. See HOW TO TURN ON THE POWER on page 18. - Page 21 If desired, adjust the 7. Turn on the fan if desired. Increase volume by pressing the volume increase and The fan features several speed settings and an decrease buttons on the auto mode. When the auto mode is selected, console. the speed of the fan will automatically increase and decrease as the speed of the walking belt Decrease...
-
Page 22: To Use An Onboard Workout
HOW TO USE AN ONBOARD WORKOUT If the speed and/or incline settings are too high or too low at any time during the workout, you can 1. Insert the key into the console. override the settings by pressing the Speed or Incline buttons. - Page 23 HOW TO USE A SET-A-GOAL WORKOUT The workout will function in the same way as the manual mode (see pages 20 and 21). 1. Insert the key into the console. The workout will continue until you reach the goal See HOW TO TURN ON THE POWER on that you set.
-
Page 24: To Use An Ifit Workout
HOW TO USE AN IFIT WORKOUT Before some workouts will download, you must add them to your schedule on iFit.com. Note: To use an iFit workout, you must have access to a wireless network (see HOW TO USE THE For more information about the iFit workouts, WIRELESS NETWORK MODE on page 28). -
Page 25: To Use The Equipment Settings Mode
HOW TO USE THE EQUIPMENT SETTINGS MODE IMPORTANT: You must still unplug the power cord after using the treadmill. Set the update 1. Select the settings main menu. time for a time when you normally use the treadmill and will be available to unplug the Insert the key into the console power cord after an update. - Page 26 11. Enable or disable a passcode. 12. Set a safety screen timeout. The console features a child-safety passcode, The console features an automatic screen reset; if designed to prevent unauthorized users from using no buttons are touched or pressed and the walking the treadmill.
- Page 27 HOW TO USE THE MAINTENANCE MODE Note: Occasionally, a firmware update may cause your console to function slightly differently. These 1. Select the settings main menu. updates are always designed to improve your exer- cise experience. See step 1 on page 25. 4.
-
Page 28: Wireless Network Mode
HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button The console features a wireless network mode that to connect to the network or touch the Cancel but- allows you to set up a wireless network connection. - Page 29 HOW TO USE THE STEREO SOUND SYSTEM Note: While you are using the browser, the speed, incline, fan, and volume buttons will still function, but To play music or audio books through the console’’s the workout buttons will not function. speakers, you must connect your MP3 player, CD player, or other personal audio player to the console.
-
Page 30: How To Move The Treadmill
HOW TO MOVE THE TREADMILL Due to the size and weight of the treadmill, moving 2. After the treadmill is placed in the location where it requires two or three persons. it will be used, make sure that the leveling feet rest firmly on the floor. -
Page 31: Troubleshooting
TROUBLESHOOTING Most treadmill problems can be solved by follow- SYMPTOM: The console screen remains lit when ing the simple steps below. Find the symptom that you remove the key from the console applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. - Page 32 SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifications described on page 16. a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD.
-
Page 33: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat——To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy. -
Page 34: Part List
PART LIST Model No. NTL22011.2 R0113A Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Belt Guide 8 x 1/2" Screw #8 x 3/8" Screw 3/8" x 2" Screw Wire Tie 3/8" x 2 1/2" Screw Drive Roller/Pulley #8 x 3/4"... - Page 35 Key No. Qty. Description Key No. Qty. Description Front Cushion Sensor Ground Wire Cushion Adjust Assembly #1 Pulse Bar Top Left Inside Frame Cover Handrail Frame Right Inside Frame Cover Chest Strap Right Outside Frame Cover Warning Decal Cover Insert Left Inside Upright Cover 3/8"...
-
Page 36: Exploded Drawing
EXPLODED DRAWING A Model No. NTL22011.2 R0113A... - Page 37 EXPLODED DRAWING B Model No. NTL22011.2 R0113A...
- Page 38 EXPLODED DRAWING C Model No. NTL22011.2 R0113A...
- Page 39 EXPLODED DRAWING D Model No. NTL22011.2 R0113A...
-
Page 40: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...