Radio; Basic Operations; Storing And Recalling Stations; Function Settings - Pioneer MVH-8250BT Operation Manual

Media center receiver
Hide thumbs Also See for MVH-8250BT:
Table of Contents

Advertisement

Available languages

Available languages

Section
03
Operating this unit

Radio

Basic Operations

3
1 Indicator display area
Refer to Indicator list on page 38.
2 Text information area
! Band/Preset number/Frequency indica-
tor
3 Source image display
Manual tuning (step by step)
1 Push M.C. left or right.
Seeking
1 Push and hold M.C. left or right, and then re-
lease.
You can cancel seek tuning by pushing M.C. left
or right.
While pushing and holding M.C. left or right, you
can skip stations. Seek tuning starts as soon as
you release M.C.

Storing and recalling stations

You can easily store up to six stations for each
band as presets.
Downloaded from Caradio-Manual.com Manuals
12
En
1
16:54
Local
A-EQ
FM1
1 87.50
P.CH
MHz
2 2 2
Using the preset screen
1 Push M.C. up or down to display the preset
screen.
2 Push M.C. up or down until the desired band
(FM1, FM2, FM3 for FM or AM) is displayed.
3 Use M.C. to store the selected frequency in the
memory.
Turn to change the preset number. Press and
hold to store.
4 Use M.C. to select the desired station.
Turn to change the station. Press to select.
You can also display the preset screen by pressing
HOME. Refer to Basic menu operations on page 9.

Function settings

1
Press M.C. to display the function
menu.
2
Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
BSM (best stations memory)
BSM (best stations memory) automatically stores the
six strongest stations in the order of their signal
strength.
1 Press M.C. to turn BSM on.
To cancel, press M.C. again.
Local (local seek tuning)
Local seek tuning lets you tune in to only those radio
stations with sufficiently strong signals for good re-
ception.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
FM: Off—Level1—Level2—Level3—Level4
AM: Off—Level1—Level2
The larger the setting number, the higher the sig-
nal level. The highest level setting allows recep-
tion of only the strongest stations; while lower
settings let you receive progressively weaker sta-
tions.
3 Press M.C. to confirm the selection.
Note
Operation is complete even if the menu is can-
celled before being confirmed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvh-8250

Table of Contents