Adjusting The Basic Position Of The Clutch Lever - KTM 690 DUKE EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.14

Adjusting the basic position of the clutch lever

Info
Turn the adjusting screw clockwise to increase the distance between the clutch lever and the handlebar.
Turn the adjusting screw counterclockwise to decrease the distance between the clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply force.
Do not make any adjustments while riding!
–
Check the chain sliding guard for wear.
» If drill hole
–
Replace the chain sliding guard.
–
Check that the chain sliding guard is firmly seated.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding
B00942-10
guard
–
Adjust the basic position of the clutch lever to your hand size by turning adjusting
screw .
1
B00943-10
becomes visible on the chain sliding guard in area
D
x
M6
:
C
10 Nm Loctite ® 243™
(7.4 lbf ft)
87