14
ELECTRICAL SYSTEM
14.11
Changing the turn signal bulb (Duke)
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease before
mounting.
Main work
–
Pull cable sleeve
–
Remove the bulb.
–
Position a new light bulb in the socket.
Parking light (W5W / socket W2.1x9.5d) (
–
Carefully position socket
–
Mount cable sleeve
B00975-10
Finishing work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
and the socket of parking light
1
with the bulb in the housing.
2
.
1
p. 133)
carefully out of the housing.
2
p. 174)
p. 128)
132