Output (Contactor) Switch; Ac Balance Control - Miller Electric Syncrowave 500 Owner's Manual

3-6. Output (Contactor) Switch

Weld output terminals are
energized when switch is
On and Power is On.

3-7. AC Balance Control

Balance Control Waveform Examples
Balanced
3
More Penetration
10
More Cleaning
0
OM-350 Page 20
50% Electrode
Positive
50% Electrode
Negative
32% Electrode
Positive
68% Electrode
Negative
55% Electrode
Positive
45% Electrode
Negative
1
1
1 Output (Contactor) Switch
Use switch to select way of control-
ling unit output.
For weld output, place switch in On
position.
For remote output control, place
switch in Remote 14 position (see
Section 2-13).
1 AC Balance Control
Use control to change the ac output
square wave.
Turn control towards 10 to obtain
deeper penetration. Turn control to-
wards 0 to obtain more cleaning ac-
tion of the workpiece. The wave
shape of position 3 (balanced), pro-
vides equal penetration and clean-
ing action, and is a recommended
starting point for GTAW.
S-0795-A