NordicTrack Cxt 990 User Manual page 11

EXERCISING ON THE ELLIPTICAL CROSSTRAINER
To mount the elliptical crosstrainer, hold the handgrip
pulse sensor and step onto the pedal that is in the
lowest position. Next, step onto the other pedal. Push
the pedals until they begin to move with a continuous
motion. Note: The pedal disks can turn in either
direction. It is recommended that you turn the
pedal disks in the direction shown by the arrow
below. To give variety to your exercise, turn the
pedal disks in the opposite direction.
Handgrip
Pulse Sensor
Pedal
Pedal Disk
To dismount the elliptical crosstrainer, wait until the
pedals come to a complete stop. The elliptical
crosstrainer does not have a free wheel; the ped-
als will continue to move until the flywheel stops.
When the pedals are stationary, step off the highest
pedal first. Then, step off the lowest pedal.
HOW TO USE THE UPPER BODY ARMS
As you exercise,
push and pull the
upper body arms
in order to work
your arms, back,
and shoulders. To
exercise only your
lower body, hold
the handgrip pulse
sensor as you
exercise.
11
Upper Body Arms
Handgrip
Pulse
Sensor