How To Use The Elliptical Crosstrainer - NordicTrack Cxt 990 User Manual

HOW TO USE THE ELLIPTICAL CROSSTRAINER

HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunc-
tion or break down, earthing provides a path of least
resistance for electric current to reduce the risk of
electric shock. This product is equipped with a cord
having an equipment-earthing conductor and an earth-
ing plug.
Two power cords
are included.
Select the one
that will fit your
outlet. Refer to
drawing 1, and
plug the indicat-
ed end of the
power cord into
the socket at the
back of the ellip-
tical crosstrainer.
Refer to drawing
2. Plug the power
cord into an
appropriate outlet
that is properly
installed and
earthed in accor-
dance with all
local codes and
ordinances. Note: In Italy, an adapter (not includ-
ed) must be used between the power cord and the
outlet. Important: The elliptical crosstrainer is not
compatible with GFCI-equipped outlets.
If the power cord is damaged, it must be replaced with
a manufacturer-recommended power cord.
1
Socket on
Elliptical
Crosstrainer
2
Outlet
DANGER:
the equipment-earthing conductor can result
in an increased risk of electric shock. Check
with a qualified electrician or serviceman if
you are in doubt as to whether the product is
properly earthed. Do not modify the plug pro-
vided with the product—if it will not fit the out-
let, have a proper outlet installed by a qualified
electrician.
THE ON/OFF SWITCH
Locate the on/off switch
at the back of the ellipti-
cal crosstrainer. The
switch must be in the on
position when the ellipti-
cal crosstrainer is used. If
necessary, move the
switch to the on position.
HOW TO ADJUST THE PEDALS
The motion of the
pedals is deter-
mined by their
positions on the
spring arms. There
are five different
pedal positions. To
adjust the pedals,
first loosen the
knob beneath each
pedal. Slide the
pedals forward or
backward to the
desired position,
and then retighten
the knobs. Make
sure that both ped-
als are in the same
position.
10
Improper connection of
On
Position
Pedal
Knob