How To Connect Your Home Stereo; How To Connect Your Computer - NordicTrack Cxt 1400 Elliptical User Manual

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the adaptor. Plug the adaptor into
the LINE OUT jack on your stereo.
A
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the adaptor. Plug the adaptor into
an RCA Y-adaptor (available at electronics stores).
Next, remove the wire that is currently plugged into
the LINE OUT jack on your stereo and plug the
wire into the unused side of the Y-adaptor. Plug the
Y-adaptor into the LINE OUT jack on your stereo.
B
Audio Cable
Wire removed from
LINE OUT jack
CD
VCR
Amp
LINE OUT
LINE OUT
Audio
Adaptor
Cable
CD
VCR
Amp
LINE OUT
RCA Y-adaptor
Adaptor

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT
jack, see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the LINE OUT jack on your com-
puter.
A
B. Plug one end of the audio cable into the jack
beneath the console. Plug the other end of the
audio cable into the splitter. Plug the splitter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the splitter.
B
21
LINE OUT
Audio
Cable
PHONES
Audio
Splitter
Cable
Headphones/Speakers