Assembly - NordicTrack Audiostrider Cx650 Elliptical User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included tools and your own Phillips screwdriver
wrench , and rubber mallet
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe-
ses below each drawing is the key number of the part, from the PART LIST near the end of the manual. The
number following the parentheses is the quantity needed for assembly. Note: Some small parts may have
been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled.
Wave Washer
(80)–2
M8 Split
Washer (97)–16
M8 x 19mm Button
Screw (85)–6
M8 x 45mm Button
Screw (90)–6
Large Wave M8 Washer
Washer (89)–4
M10 Split
Washer (99)–2 Locknut (82)–2
M8 x 23mm Shoulder
Screw (86)–4
.
M8 x 23mm x
(95)–4
1mm Washer
(31)–4
M4 x 16mm
M10 Nylon
Round Head
Screw (78)–25
M10 x 78mm Carriage Bolt (92)–2
M10 x 80mm Button Screw (93)–2
5
, adjustable
M8 x 23mm x
2mm Washer
(96)–8
M8 x 14mm Button
Screw (84)–6