Transmit Power Alignment - Motorola MT 2000 User Manual

SERVICE

4.2.1.2 TRANSMIT POWER ALIGNMENT

RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
...TRANSMIT POWER
Frequency
806.0125
815.0125
824.9875
851.0125
860.0125
869.9875
0
Min
F1 F2
HELP
Refer to your radio service manual for the transmitter power alignment procedure. This procedure should only be
attempted by qualified service personnel.
The adaptive splatter control feature uses the transmitter power settings for reduced transmit power under strong
received signal conditions to reduce adjacent-channel interference.
Transmitter power is adjusted by first keying the radio via F6, and then by pressing the up/down arrow keys to
increase or decrease power respectively. SHIFT up/down will increase the adjustment speed. A relative Tx power
value (NOT WATTS) will be displayed, but the actual transmitter power output must be determined from your
service monitor.
PROGRAMMING PROCEDURE:
1. Press F2 at the MAIN MENU. The SERVICE MENU appears.
2. Press F2. The TRANSMITTER ALIGNMENT MENU appears.
3. Press F3. The TRANSMIT POWER screen appears.
4. Press Tab to select the desired field, or press the desired function key (F1 - F10).
5. If a field is selected, press the up/down arrow keys to select choice or value.
Function key descriptions and field definitions are on the following page.
4-6
At the SERVICE MENU, press
Model:
TRANSMIT POWER
Current Value
High Pwr Low Pwr
30 26
42 42
50 50
60 60
70 70
80 80
F3 F4
F2 F3
Use UP/DOWN Arrows To Adjust Softpot.
Transmitter..........Off
F5 F6 F7
TOGGLE
PTT
.
New Softpot Value
High Pwr Low Pwr
30 26
42 42
50 50
60 60
70 70
80 80
F8 F9
PROGRAM
VALUE
68P81074C50
MTSX RSS
127
Max
F10
EXIT