Read Desired Source Archive File; Clone Current Radio From Archive File - Motorola MT 2000 User Manual

TUTORIAL
3.4.4

Read Desired Source Archive File

MOTOROLA Radio Service Software
MTSX
MAIN:GET/SAVE/PROG:GET FILE
Archive:
A466ASNO.331
A467ASNO.361
A469ASNO.431
F1
HELP CHANGE
ARCHIVE
3.4.5

Clone Current Radio From Archive File

Radio codeplugs consist of both personality and tuning data. Cloning allows you to "merge" two codeplugs
together. The archive file or radio with the desired personality will be referred to as the source file or source
radio. The other will be referred to as the target radio. The result will be an image that can be programmed into
a radio and/or saved to an archive file. This image will have the source codeplug's personality yet the tuning data
of the target codeplug will remain unchanged. In this tutorial, the source personality is the file saved in the first
tutorial, and the target radios are the remaining radios not yet programmed.
The IDs for MDC-1200, DTMF, etc. must be changed manually if you want to
have unique IDs! You may do this by going to CHANGE/VIEW immediately after
cloning each radio.
3-26
Model: H01WCF4DB5AN
F2 F3 F4
Press Enter to Select File Name.
Press F8 to Load Codeplug File.
ARCHIVE FILES
F5 F6 F7
CHDIR CHDIR
DELETE
SELECTED UP DOWN
NOTE
MTSX RSS
F8 F9 F10
GET EXIT
ARCHIVE
68P81074C50