Mdc Systems - Motorola MT 2000 User Manual

CHANGE/VIEW

6.2.3.3.1 MDC SYSTEMS

RSS LOCATION:
MOTOROLA Radio Service Software
MTSX
MAIN:CHANGE/VIEW:CONV:MDC:SYSTEM
MDC System............1
Primary ID..............................................0001
Secondary ID .................................00000000
Variable ID ..............................................000
Leading PTT-ID ................................Enabled
PTT-ID Sidetone ...........................Disabled
Trailing PTT-ID ................................Disabled
Radio Check ....................................Disabled
Radio Inhibit.....................................Disabled
Status ...............................................Enabled
Status Request ................................Disabled
Message ..........................................Disabled
F1 F2
HELP ADD
SYS
This screen allows you to change or view parameters that pertain to an MDC system. The settings shown are
only for the system shown.
PROGRAMMING PROCEDURE:
1. Press F4 at the MAIN MENU. The CHANGE/VIEW MENU appears.
2. Press F6. The CONVENTIONAL MENU appears.
3. Press F4. The MDC CONFIGURATION MENU screen appears.
4. Press F3. The MDC SYSTEM screen appears.
5. Press Tab to select the desired field, or press the desired function key (F1 - F10).
6. If a field is selected, press the UP/DOWN arrow keys to select choice or value.
FUNCTION KEY DESCRIPTIONS:
F1 - HELP provides useful information about the currently displayed menu, screen, or field.
F2 - ADD SYS (Add System) allows you to add a system.
F3 - PREV SYS (Previous System) allows you to go to the system before the current one.
F4 - NEXT SYS (Next System) allows you to go to the system after the current one.
6-104
At the CHANGE/VIEW MENU, press
Model:
F3 F4
PREV NEXT
SYS SYS
F4
F6
Enter or Scroll to Select System.
MDC SYSTEM
Emergency ..................................Enabled
Emergency Type................Alarm and Call
Emer PTT ID Sidetone ..............Enabled
Acknowledge Alert Tone ...........Enabled
Num
1
2
3
F5 F6 F7
DELETE
MORE EMER
SYS
OPTIONS
F3
.
Revert Table
Zone Channel
1 1
1 1
1 1
F8 F9
MORE
OPTIONS
68P81074C50
MTSX RSS
F10
EXIT