Steps To Fill In The Scan List - Motorola MT 2000 User Manual

MTSX RSS
3.3.14 Fill in the Scan List
Now that the Zone/Channel features are programmed, we will fill in the scan list.
Instruction
1. Go to Radio Wide Configuration
menu
2. Go to Scan List
3. Go to Member # 1 Zone
4. Select the desired zone
5. Go to Channel field
6. Enter channel number desired
to scan
7. Repeat steps 4 through 6 until
desired channels are entered.
8. If you have created more than 1
Scan List, repeat entire table for
each scan list.
9. Exit to MAIN MENU
68P81074C50
Table 3-21. Steps to Fill in the Scan List
What to Type
F3
F5
TAB
TAB
ESC
How to do it/What it Means
From the Change/View menu, press F3 to see
the Radio Wide Configuration Menu.
Press F5 to see Scan List screen. If "1" is not
already displayed for Scan List number, press
F3 to see previous list. If "1" is displayed,
proceed ahead.
Pressing Tab advances the prompt to the Zone
field of Scan List Member # 1.
Press up/down arrow keys to select desired zone
or enter zone number via the keyboard.
Pressing Tab advances the prompt to the
Channel field.
Press up/down arrow keys to select desired
channel or enter channel number via the
keyboard.
Press Esc to exit to MAIN MENU.
TUTORIAL
3-23