Program A Talkgroup Scan With One List; Steps To Program Talkgroup Scan With One Lis - Motorola MT 2000 User Manual

TUTORIAL
3.3.11 Program Talkgroup Scan with One List
Table 3-18 provides the steps required to program Talkgroup scan with one list.
Instruction
1. Go to Scan List screen
2. Go to Scan Type field
3. Select Talkgroup Scan
4. Exit to Change/View Menu
3-20
Table 3-18. Steps to Program Talkgroup Scan with One List
What to Type
F5
TAB
F10
How to do it/What it Means
Press F5 at the Radio Wide Configuration Menu to
see Scan List screen.
If not already highlighted, press Tab to advance the
prompt to Scan Type field.
Press up/down arrow keys to select Talkgroup Scan.
Note: This is necessary to allow the Scan List to be
referenced by a trunked personality.
F10
Press F10 twice to exit to Change/View Menu.
MTSX RSS
68P81074C50