Options - Icom IC-F3061T Instruction Manual

9

OPTIONS

VOX gain and delay adjustment
q Attach the connector of the VS-1SC into the multi-con-
nector on the transceiver and tighten the screw.
• Toggle the VOX/PTT select switch to [VOX].
w Enter user set mode. (p. 16)
e Push [P0] several times to select the "VOX Gain" or "VOX
Delay" items. Then, push [Side2] or [Side3] to set the de-
sired level/condition.
r Rotate [VOL] to turn the power OFF to exit user set mode.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF or 1 to 6
(more sensitive).
VOX OFF
SET TXCU TXC CALA
VOX function is OFF
28
SET X TXC
[Side2]
VOX GAIN 3
Push
[Side3]
SET TXCU TXC CALA
VOX gain level 3
(default)
SET X TXC
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (0.5 sec.
step) for a convenient interval before returning to receive.
[Side2]
VOX DLY0.5
Push
[Side3]
SET TXCU TXC CALA
0.5 sec (min.)
(default)
NOTE: MIC/VOX gain can be adjusted via the Adjusting
pot using a thin screw driver.
SET X TXC
VOX DLY3.0
SET TXCU TXC CALA
3.0 sec (max.)
SET X TXC