Setting Auto-Start Time; Activating Auto-Start; Descale; Setting The Temperature - DeLonghi ESAM6620 Owner's Manual

Please note:
to display the time with the appliance off, press
any button. The time will be displayed for 5
seconds.

Setting auto-start time

You can set the auto-start time in order to
have the appliance ready at a certain time (for
example in the morning) so you can make coffee
immediately.
• Make sure the clock on the appliance has
been set as described in the previous
section.
• Press the P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "START".
• Press the
the SET symbol flashing on the display) to
set the auto-start time. (If you hold the SET
button down, the time changes rapidly).
• Press the OK button to confirm.

Activating auto-start

• Press the SET button again and "AUTO-
START NO" is displayed.
• P ress the
the SET symbol flashing on the display) to
modify the function (the appliance displays
AUTO-START YES);
• Press the OK button to activate auto-start;
• Press the P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or
parameters.
Please note:
When the auto-start time is set, the
appears alongside the time on the display.

Descale

For instructions on descaling, see page 18.

Setting the temperature

To modify the temperature (low, medium, high)
of the water used to make the coffee, proceed
as follows:
• Press the P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "TEMPERATURE".
symbol
button (corresponding to
button (corresponding to
to change other
symbol
symbol
• Press the
SET symbol flashing on the display) until
the appliance displays the required coffee
temperature (low, medium,
• Press the OK button to confirm the
temperature selected;
• Press the P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or
parameters.

Auto-Off

The appliance is set to switch automatically to
stand-by if not used for 3 hours.
The time can be changed so that the appliance
switches off after 1, 2 or 3 hours.
• Press the P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "OFF AFTER 3 HOURS".
• Press the
the SET symbol flashing on the display) to
change the number of hours the appliance
remains on.
• Press the OK button to confirm.
• Press the P button (corresponding to the
ESC symbol flashing on the display) to exit
programming mode or
parameters.

Setting water hardness

For instructions on setting water hardness, see
37.

Default values (reset)

This resets all menu settings and programmed
quantities back to the default values (with the
exception of the language which remains as
set).
• Press the P button, then press the
button (corresponding to the
flashing on the display) repeatedly until the
menu arrow is on "DEFAULT VALUES NO"
• Press the
the SET symbol flashing on the display) and
the appliance will display "DEFAULT VALUES
YES";
• Press the OK button to reset the default
values;
• Press the P button (corresponding to the
12
button (corresponding to the
high);
to change other
button (corresponding to
to change other
button (corresponding to
symbol
symbol