Multi-Function Meter Unit - Yamaha SUPER TENERE XT1200Z Owner's Manual

4
1 2 3
1. Traction control system switch
2. Traction control system indicator/warning
light "TCS"
3. Engine trouble warning light "
4. Traction control system mode display
Try to reset the traction control system
and the lights by following the proce-
dures under "Resetting" on page 3-22.
Immobilizer system indicator light
The electrical circuit of the indicator
light can be checked by turning the key
to "ON". The indicator light should
come on for a few seconds, and then
go off.
INSTRUMENT AND CONTROL FUNCTIONS
If the indicator light does not come on
initially when the key is turned to "ON",
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
When the key is turned to "OFF" and 30
seconds have passed, the indicator
light will start flashing indicating the im-
mobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
" The self-diagnosis device also detects
problems in the immobilizer system cir-
cuits. (See page 3-14 for an explana-
tion of the self-diagnosis device.)
EAU38624

Multi-function meter unit

11
1. Tachometer
2. Traction control system mode display
3. Coolant temperature display/air intake tem-
4. Speedometer
5. Fuel meter
6. Drive mode display
7. Clock
8. Right set button
9. Left set button
10.Odometer/tripmeter/fuel reserve tripmeter
11.Traction control system switch
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
3-8
1 2 3 4
10 9 8
perature display/instantaneous fuel con-
sumption display/average fuel consumption
display
WARNING
EAU49606
5
3
7 6
EWA12422