Multi-Function Meter Unit - Yamaha FJR13ESM 2020 Owner's Manual

Instrument and control functions
TIP
In some cases, the cruise control sys-
tem may not be able to maintain the set
cruising speed when the vehicle is
traveling uphill or downhill.
 When the vehicle is traveling up-
hill, the actual traveling speed may
become lower than the set cruis-
ing speed. If this occurs, acceler-
ate to the desired traveling speed
using the throttle.
 When the vehicle is traveling
4
downhill,
speed may become higher than
the set cruising speed. If this oc-
curs, the setting switch cannot be
used to adjust the set cruising
speed. To reduce the traveling
speed, apply the brakes. When
the brakes are applied, the cruise
control system will become deac-
tivated.
the actual traveling

Multi-function meter unit

12 3 4 5
1. "RESET" button
2. "TCS" button
3. Tachometer
4. Drive mode display
5. Eco indicator "ECO"
6. Fuel meter
7. Speedometer
8. Clock
9. Transmission gear display
10.Function display
11.Information display
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
TIP
The select switch "
menu switch "MENU" are located on
the left handlebar. These switches al-
low you to control or change the set-
tings of the multi-function meter unit.
4-7
EAU58215
6 7 8 9 10 11
GEAR
N
A.TEMP ˚F
77
C.TEMP ˚F
Lo
TIME TRIP
0:06
EWA12423
/ " and the