Replacing A Turn Signal Light Bulb; Replacing A License Plate Light Bulb - Yamaha SUPER TENERE XT1200Z Owner's Manual

Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU24204
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing a license plate light
1
bulb
1. Remove the license plate light unit
1. License plate light unit
2. License plate light unit bolt
2. Remove the license plate light bulb
[ECA11191]
6-33
bolts.
1
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
EAU49721
2
6