Maintenance And Care; Troubleshooting - Kärcher K 2.200 Balcony Manual

Maintenance and care

Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Care
Prior to longer periods of storage, e.g. in
the winter:
 Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
 Use a moist cloth and clean the PS 20
after use.
Maintenance
The appliance is maintenance free.
Spare parts
Use only original KÄRCHER spare parts.
You will find a list of spare parts at the end
of these operating instructions.

Troubleshooting

You can rectify minor faults yourself with
the help of the following overview.
If in doubt, please consult the authorized
customer service.
Danger
Turn off the appliance and remove the
mains plug prior to any care and mainte-
nance work.
Repair works may only be performed by the
authorised customer service.
Appliance is not running
 Pull on the lever of the trigger gun; the
device will switch on.
 Check whether the voltage indicated on
the type plate corresponds to the volt-
age of the mains supply.
 Check the mains connection cable for
damages.
Pressure does not build up in the
 Appliance ventilation: Switch the appli-
ance on with the high-pressure hose
detached and operate (max. 2 minutes)
until the water exits the high-pressure
connection without bubbles. Switch off
appliance and reconnect high-pressure
hose.
 Check the water supply.
 Pull out the sieve in the water connec-
tion using flat-nose pliers and clean un-
der running water.
Strong pressure fluctuations
 Check water flow quantity.
 Clean high-pressure nozzle: Remove
dirt and debris from the nozzle bore, us-
ing a needle and rinse through with wa-
ter from the front.
 Check and clean the built-in high pres-
sure nozzles of your PS 20.
Illustration
Remove the clip.
–
Remove the high pressure nozzles and
–
clean them under flowing water.
Rinse the PS20 with clear water.
–
Illustration
Install the high pressure nozzles.
–
Reinsert the clip.
–
Appliance is leaking
 Slight leakage from the appliance pump
is normal. If the leakage increases con-
tact the authorized customer service.
– 11
EN
appliance
19