Configure Upnp - TRENDnet 14dBi User Manual

3.4.3 Configure UPnP

Universal Plug and Play (UPnP) is an architecture to enable pervasive peer-to-peer network connectivity
between PCs, intelligent devices and appliances when UPnP is supported. UPnP works on TCP/IP network to
enable UPnP devices to connect and access to each other, very well adopted in home networking
environment.
UPnP : By default, it's "Disable". Select "Enable" or "Disable" of UPnP Service.

Click Save button to save changes and click Reboot button to activate changes
For UPnP to work in Windows XP, the "TEW-455APBO"must be available in "My Network Places", as shown
here:
If these devices are not available, you should verify that the correct components and services are loaded in
Windows XP. Please refer to Appendix D. Using UPnP on Windows XP
TEW-455APBO High Power Wireless Outdoor PoE Access Point
42
User Manual