Configure Upnp - TRENDnet TEW-455APBO User Manual

3.4.3 Configure UPnP
Universal Plug and Play (UPnP) is an architecture to enable pervasive peer‐to‐peer network connectivity
between PCs, intelligent devices and appliances when UPnP is supported. UPnP works on TCP/IP network to
enable UPnP devices to connect and access to each other, very well adopted in home networking
environment.
UPnP : By default, it's "Disable". Select "Enable" or "Disable" of UPnP Service.
Click Save button to save changes and click Reboot button to activate changes
For UPnP to work in Windows XP, the "TEW‐455APBO"must be available in "My Network Places", as shown
here:
If these devices are not available, you should verify that the correct components and services are loaded in
Windows XP. Please refer to Appendix D. Using UPnP on Windows XP
TEW‐455APBO High Power Wireless Outdoor PoE Access Point
42
User Manual