Configure Lan Ip - TRENDnet 14dBi User Manual

3.1.2 Configure LAN IP

Here are the instructions to setup the local IP Address and Netmask.
Please click on System  LAN and follow the below setting.
Mode: Check either "Static IP" or "Dynamic IP" button as desired to set up the system IP of LAN port.

Static IP: The administrator can manually setup the LAN IP address when static IP is preferred.

IP Address: The IP address of the LAN port; default IP address is 192.168.10.100

IP Netmask: The Subnet mask of the LAN port; default Netmask is 255.255.255.0

IP Gateway: The default gateway of the LAN port; default Gateway is 192.168.10.1

Dynamic IP: This configuration type is applicable when the TEW-455APBO is connected to a network

with presence of a DHCP server. All related IP information will be provided by the DHCP server
automatically.
Hostname : The Hostname of the LAN port

TEW-455APBO High Power Wireless Outdoor PoE Access Point
17
User Manual