Wireless Lan Network Creation; Wireless General Setup - TRENDnet 14dBi User Manual

3.2 Wireless LAN Network Creation

The network manager can configure related wireless settings, General Settings, Advanced Settings, Virtual AP
(VAP) Setting, Security Settings, and Access Control Settings.

3.2.1 Wireless General Setup

The administrator can change the data transmission, channel and output power settings for the system. Please
click on Wireless -> General Setup and follow the below setting.
MAC address: The MAC address of the Wireless interface is displayed here.

Band Mode: Select an appropriate wireless band; bands available are 801.11b, 802.11g and

802.11b+802.11g.
Transmit Rate Control: Select the desired rate from the drop-down list; the options are auto or ranging

from 1 to 54Mbps for the 802.11g and 802.11b/g modes, or 1 to 11Mbps for the 802.11b mode.
Domain: Select the desired domain from the drop-down list; the options are FCC and ETSI.

Channel: The channel range will be changed by selecting different domain. The channels range from 1 to

11 for the FCC domain, or 1 to 13 for the ETSI domain.
TEW-455APBO High Power Wireless Outdoor PoE Access Point
19
User Manual