Charcoal Filter - GE Profile 164D3370P003 Owner's Manual

Helpful Information
The Exhaust Feature

Charcoal Filter

(on some models)
The charcoal filter
cannot be cleaned. It
must be replaced. Order
Part No. WB02X9883
from your GE supplier.
To Remove
Charcoal Filter
Remove 2 grille screws to
remove the grille.
To Install
Charcoal Filter
46
If the model is not vented
to the outside, the air will
be recirculated through a
disposable charcoal filter
that helps remove smoke
and odors.
To remove the charcoal
filter, disconnect power at
the main fuse or circuit
breaker panel or pull the
plug.
To install a new filter,
remove plastic and other
outer wrapping from the
new filter.
The charcoal filter should
be replaced when it is
noticeably dirty or dis-
colored (usually after 6 to
12 months, depending on
hood usage).
Remove the top grille by
removing the 2 screws that
hold it in place. Slide the
filter towards the front of
the oven and remove it.
Insert the filter into the
top opening of the oven as
shown. It will rest at an
angle on 2 side support
tabs and in front of the
right rear tab. Replace
the grille and 2 screws.