Helpful Information
Light Bulb Replacement
Cooktop Light/
Night Light
Replace with 40-watt
incandescent bulbs.
Order WB02X4253 from
your GE supplier. High
intensity 40-watt bulbs
(40S11N/1), available
in supermarkets and
hardware stores, may
also be used for
replacements.
Oven Light
Replace the burned-out
bulb with a 40-watt
incandescent bulb
(WB02X4253), available
from your GE supplier.
44
1 To replace combination
cooktop light/night
light, first disconnect the
power at the main fuse
or circuit breaker panel
or pull the plug.
2 Remove the screw on the
right side of the light
compartment cover and
lower the cover until it
stops.
REMOVE SCREW
1 To replace the oven
light, first disconnect the
power at the main fuse
or circuit breaker panel
or pull the plug.
2 Remove the top grille by
taking out the 2 screws
that hold it in place.
3 Be sure the bulb(s) to be
replaced are cool before
removing. Break the
adhesive seal by gently
unscrewing the bulbs.
4 Raise light compartment
cover and replace the
screw. Connect electrical
power to the oven.
3 Next, remove the single
screw located above the
door near the center of
the oven that secures the
light housing.