Installing The Charcoal Filter - GE PVM2070 Installation Instructions Manual

C5.
MOUNT THE MICROWAVE
OVEN (cont.)
5 Insert 2 self-aligning screws
through outer top cabinet
holes. Turn two full turns on
each screw.
7 Tighten the outer two screws to the top of the
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
Install grease filters. See the Owner's Manual
8
packed with the microwave.
Installation Instructions
6 Tighten center
screw completely.
22
C6.
INSTALLING THE
CHARCOAL FILTER
1 Remove screws on top front of grille using a #2
Phillips screwdriver.
2
Open the door.
3
Remove the grille.
Slide the grille to the left and pull it straight off.
4
Install the charcoal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.
5
Replace the grille and the screws.
Close the door.
6
Insert mesh-side up
Charcoal
Filter