Installing The Charcoal Filter - GE Spacemaker JVM1630CH Installation Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

C4.
MOUNT THE OVEN
(continued)
3
Attach the oven to the top cabinet by inserting
2 self-aligning screws through outer top cabinet
holes. Turn two full turns on each screw. Be sure
to keep power cord tight. Be careful not to pinch
the cord, especially when mounting flush to
bottom of cabinet.
4 Tighten the two screws to the top of the oven
completely. (While tightening screws, hold
the oven in place against the wall and the top
cabinet.)
5
Install grease filters. See the Owner's Manual
packed with the oven.
Installation Instructions
22
C5.
INSTALLING THE
CHARCOAL FILTER
1
Remove 2 screws on top of grille using a
Phillips screwdriver.
2
Open the door 90°.
Remove the grille.
3
4
Insert the top of the filter up and into the grooves
on the inside of the top opening.
5
Push the bottom of the filter in until it snaps into
place behind the locking tabs. When properly
installed, the wire mesh of the filter should be
visible from the front.
6
Replace the grille and the 2 screws.
Close the door.
7
Insert mesh-side up
Charcoal
Filter

Advertisement

Chapters

Table of Contents
loading

Table of Contents