Yamaha TT-R125(M) Owner's Service Manual page 428

REAR SHOCK ABSORBER
Installation
1. Install:
Rear shock absorber
On frame.
NOTE:
Install the rear shock absorber with its warning
label a facing left side of the machine.
2. Install:
Bolt (rear shock absorber - frame)
Plain washer 1
Nut 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt (rear shock absorber - frame).
3. Install:
Bolt (rear shock absorber - relay arm)
Plain washer 1
Nut 2
NOTE:
Apply the molybdenum disulfide grease on the
bolt (rear shock absorber - relay arm).
5 - 47
CHAS
53 Nm (5.3 m · kg, 38 ft · lb)
35 Nm (3.5 m · kg, 25 ft · lb)