Yamaha TT-R125(M) Owner's Service Manual page 196

CARBURETOR
4. Install:
Pilot jet 1
Main jet nozzle 2
Main jet 3
Needle valve seat 4
Needle valve seat holder 5
Main jet washer 6
5. Install:
Needle valve 1
Float 2
Float pivot pin 3
NOTE:
After installing the needle valve to the float,
install them to the carburetor.
Check the float for smooth movement.
6. Install:
Gasket
Float chamber 1
Screw (float chamber) 2
7. Install:
Spring 1
Starter plunger 2
On starter cable 3.
8. Install:
Jet needle set 1
Needle holder 2
On throttle valve 3.
NOTE:
Align the projections a on the throttle valve
with the grooves b in the needle holder.
4 - 9
ENG