Table of Contents
Advertisement
CYLINDER HEAD
4. Remove:
Bolt (camshaft sprocket) 1
Camshaft sprocket 2
NOTE:
Attach a wire a to the timing chain to prevent
it from falling into the crankcase.
5. Remove:
Bolts (cylinder head)
Cylinder head
NOTE:
Loosen the bolts 1/4 turn each and remove
then after all are loosened.
Loosen the bolts starting with the lowest
number one.
INSPECTION
Cylinder head
1. Eliminate:
Carbon deposits (from the combustion
chambers)
Use a rounded scraper.
NOTE:
Do not use a sharp instrument to avoid dam-
aging or scratching:
Spark plug threads
Valve seats
2. Inspect:
Cylinder head
Scratches/damage
3. Inspect:
Cylinder head warpage
Out of specification
Warpage measurement and re-surfacing
steps:
Attach a straightedge and a thickness
gauge on the cylinder head.
Measure the warpage.
4 - 15
ENG
Replace.
Re-surface.
Advertisement
Table of Contents
