Rocker Arms And Rocker Arm Shafts - Yamaha TT-R125(M) Owner's Service Manual

CAMSHAFT AND ROCKER ARMS
4 - 22

Rocker arms and rocker arm shafts

1. Inspect:
Cam lobe contact surface a
Adjuster surface 1
Wear/pitting/scratches/blue
tion Replace.
Measurement steps:
Measure the inside diameter a of the
rocker arm holes.
Out of specification
Inside diameter (rocker arm):
10.000 ~ 10.015 mm
(0.3937 ~ 0.3943 in)
<Limit>: 10.03 mm (0.3949 in)
Measure the outside diameter b of the
rocker arm shafts.
Out of specification
Outside diameter
(rocker arm shaft):
9.981 ~ 9.991 mm
(0.3930 ~ 0.3933 in)
<Limit>: 9.95 mm (0.3917 in)
ASSEMBLY AND INSTALLATION
1. Apply:
Molybdenum disulfide oil
(onto the camshaft cam lobe and rocker
arm hole)
Engine oil
(onto the camshaft bearing)
2. Install:
Rocker arms
Camshaft 1
3. Apply:
Engine oil
(onto the rocker arm shaft)
4. Install:
Rocker arm shaft
ENG
discolora-
Replace.
Replace.